微电流钮子开关
详细介绍
1YCF系列:
高寿命钮子开关产品图片展示：
1YCF系列高寿命钮子开关中文规格:
特色：超長寿命,可达到防水功能
应用范围：重型工业遥控器,船用.
功率：取决于触点材质：AC 125V 6A,AC 250V 3A,DC 30V 3A
机械寿命：电压10V，直流电流0.1mA时，200000次操作以上
接触电阻：最大10毫欧
绝缘电阻：电压在500V时，最小500兆欧
绝缘强度：触点间最低1000VAC至少一分钟，在触点与
外壳之间最低1000VAC至少一分钟
工作温度范围：-30度到85度
防水性：在水下10公分处可操作100次
材质
外壳：苯二酸二烯丙酯树脂（UL94V-0)
摇杆：黄铜镀铬
铜头：黄铜镀镍
框架：不锈钢
支撑支架：铜镀锡
端子/弹片：镀金或镀银.
焊锡条件
手工焊：用烙铁30瓦，控制在350℃，约5秒，同时应用焊料.
波峰焊：推荐焊接温度：260±5℃
锡侵泡时间：最多5秒.(PCB板的厚度为1.6mm)
焊接：波峰炉
6A@125VAC和28VDC 3A@250VAC
最大0.4VA@最高20VAC/DC
1YCF系列高寿命钮子开关英文规格:
SPECIFICATIONS
CONTACT RATING: AC 125V 6A, AC 250V 3A ,DC 30V 3A
MECHANICAL LIFE: 100,000 make-and-break cycles
DC 10V & 0.1mA.
CONTACT RESISTANCE: 10 mΩ max.
INSULATION RESISTANCE: 500V 500 MΩ min.
DIELECTRIC STRENGTH: 1,000 Vrms min.@sea level.
OPERATING TEMPERATURE: -30°C to 85°C.
WATER-RESISTANCE: 100 make-and-break cycles min
at 10 cm depth.
MATERIALS
CASE: Diallyl phthalate (DAP) (UL94v-0).
ACTUATOR: Brass,chrome plated.
BUSHING: Brass,nickel plated.
HOUSING: Stainless Steel.
SWITCH SUPPORT: Brass,tin plated.
TERMINAL/CONTACT: Brass,with silver or gold plated.
SOLDERING PROCESSES
MANUAL SOLDERING : Use soldering iron of 30 watts, controlled at 350°C
approximately 5 seconds while applying solder.
WAVE SOLDERING: Recommended Soldering Temperature: 260 ± 5°C
Duration of Solder Immersion: Max 5 sec. (PCB is 1.6mm in thickness)
高寿命钮子开关产品图片展示：
1YCF系列高寿命钮子开关中文规格:
特色：超長寿命,可达到防水功能
应用范围：重型工业遥控器,船用.
功率：取决于触点材质：AC 125V 6A,AC 250V 3A,DC 30V 3A
机械寿命：电压10V，直流电流0.1mA时，200000次操作以上
接触电阻：最大10毫欧
绝缘电阻：电压在500V时，最小500兆欧
绝缘强度：触点间最低1000VAC至少一分钟，在触点与
外壳之间最低1000VAC至少一分钟
工作温度范围：-30度到85度
防水性：在水下10公分处可操作100次
材质
外壳：苯二酸二烯丙酯树脂（UL94V-0)
摇杆：黄铜镀铬
铜头：黄铜镀镍
框架：不锈钢
支撑支架：铜镀锡
端子/弹片：镀金或镀银.
焊锡条件
手工焊：用烙铁30瓦，控制在350℃，约5秒，同时应用焊料.
波峰焊：推荐焊接温度：260±5℃
锡侵泡时间：最多5秒.(PCB板的厚度为1.6mm)
焊接：波峰炉
6A@125VAC和28VDC 3A@250VAC
最大0.4VA@最高20VAC/DC
1YCF系列高寿命钮子开关英文规格:
SPECIFICATIONS
CONTACT RATING: AC 125V 6A, AC 250V 3A ,DC 30V 3A
MECHANICAL LIFE: 100,000 make-and-break cycles
DC 10V & 0.1mA.
CONTACT RESISTANCE: 10 mΩ max.
INSULATION RESISTANCE: 500V 500 MΩ min.
DIELECTRIC STRENGTH: 1,000 Vrms min.@sea level.
OPERATING TEMPERATURE: -30°C to 85°C.
WATER-RESISTANCE: 100 make-and-break cycles min
at 10 cm depth.
MATERIALS
CASE: Diallyl phthalate (DAP) (UL94v-0).
ACTUATOR: Brass,chrome plated.
BUSHING: Brass,nickel plated.
HOUSING: Stainless Steel.
SWITCH SUPPORT: Brass,tin plated.
TERMINAL/CONTACT: Brass,with silver or gold plated.
SOLDERING PROCESSES
MANUAL SOLDERING : Use soldering iron of 30 watts, controlled at 350°C
approximately 5 seconds while applying solder.
WAVE SOLDERING: Recommended Soldering Temperature: 260 ± 5°C
Duration of Solder Immersion: Max 5 sec. (PCB is 1.6mm in thickness)
